Products
Dressing sticks are formulated from silicon carbide or alumina oxide and are usually used for dressing diamond wheels. To make sure the diamond particles are exposed properly, the wheel must be dressed frequently.
|
DRESSING STICKS FOR DIAMOND DISCS
|
PRODUCT NUMBER
|
DESCRIPTION
|
SIZE
|
UNIT
|
151
|
Diamond Dressing Stick, SiC.
|
0.5" x 0.5" x 6"
|
1
|
152
|
Diamond Dressing Stick, Al2O3.
|
0.5" x 0.5" x 6"
|
1
|
151- 1
|
Diamond Dressing Stick, SiC.
|
1" x 1" x 6"
|
1
|
152- 1
|
Diamond Dressing Stick, Al2O3.
|
1" x 1" x 6"
|
1
|
back to top
|
CUTTING SOLUTIONS
|
There are two recommended cutting solutions sectioning. Rust/Coolant Inhibitor is used when sectioning samples using large loads at high speeds. The coolant should be directed at the contact point between the section being cut and the abrasive wheel. The flow should be uniform on both sides of the wheel. Cutting oil is used when performing precision sectioning at low speeds. |
PRODUCT NUMBER
|
DESCRIPTION
|
METRIC
|
UNIT
|
150- 32
|
Cutting oil.
|
0.95L
|
32 oz.
|
150-128
|
3.8 L
|
1 gal.
|
|
166- 32
|
Rust/Coolant Inhibitor.
|
0.95L
|
32 oz.
|
166-128
|
3.8 L
|
1 gal.
|
|
166-640
|
19 L
|
5 gal.
|